Z Series - Stainless Steel Filter Cartridge Housings
Manufactured of AISI304 or AISI316 stainless steel. Accept standard 2.25” to 3”OD filter cartridges. These rugged & durable housings can provide decades of service. Avoids the catastrophic failures seen with plastic housings. Suitable for use with pot
Manufactured of AISI304 or AISI316 stainless steel. Accept standard 2.25” to 3”OD filter cartridges. These rugged & durable housings can provide decades of service. Avoids the catastrophic failures seen with plastic housings. Suitable for use with potable water and food products. The ¼”NPT bottom port allows easy draining.
An internal spring-loaded seal plate allows proper sealing of cartridges with varying length. Ring-nut closure provides a secure housing fit-up.
EPDM seals are provided as standard. Optional seal materials available.
Features
- Stainless steel construction resists corrosion
- Rugged, and capable of decades of use
- Component materials comply with US FDA and EU regulations for safe use with potable water
- Provides fine economy in a metal housing
- DOE cartridge connection is standard. Options for 222 and 226 types.
- Mounting bracket and pin wrench are included
Applications
- Industrial process fluids
- Restaurants & institutions
- Under-sink or whole-house water filtration
| Dimension | |
| Diameter | 104mm (4.1") |
| Length |
10” nominal (14" actual) 20” nominal (24" actual) |
| Cartridge Fit |
9.75" - 10" for 10" models 19.5" - 20" for 20" models 29.5" - 30" for 30" models |
| Materials of Construction | |
| Shell Head, Sump, Ring Nut | AISI304 Stainless Steel |
| Seal Materials | EPDM, NBR, FKM |
| Operating Limits | |
| Operating Temperature | 99°C (210°F) max. |
| Operating Pressure | 6 bar (90 psi) or 10 bar (150 psi) |
| Flow Rate* | 10 GPM for 10" models 15 GPM for 20" models |
| * Maximum service flow rate advised is dependent on the cartridge selected. | |
Order Information
catalog
- *Full Name:
- *Company:
- *Country:
- *Email Address:
- *Phone#: